BFLY FlatLine Base

With the FlatLine series we offer our approved absorber technology in a flat shape.

The FlatLine is suitable for tight spatial conditions like wall units, lowboards, racks and under loud speakers too.

The core of the FlatLine consists of special wood 3LPW, which is characterized by increasing density from inside to the outside.
The 3 different pressed layers consist of fine shavings on the top, rougher shavings in the middle and again fine shavings on the buttom. This varying density distribution, combined with the hard plastic surface, results in a very good damping characteristic.

The FlatLine series is available with 2 type of feet

Basic feet Consist of a ring of the approved granulate of cork and rubber 

PLUS feet consist of the following 2 layers

- a disc of soft polymer gel
- a ring of the approved granulate of cork and rubber

These both layers are encapsulated in a flat alumiunium cup.

FlatLine: data sheet

      - Wood (3LPW) 19 mm thick
      - Size S and S/M with 3 absorber feet
      - Size M and L mit 4 absorber feet
      - Size XL with 5 absorber feet
      - Dimensions:  Width x Depth
          S        250 x 300 mm   (WxD)    
          S/M   250 x 350 mm   (WxD)    
          M       440 x 350 mm   (WxD)
          L        500 x 400 mm   (WxD) 
          XL      560 x 460 mm   (WxD)

      - Height:
         Basic   22 mm
         PLUS   30 mm

      - Size S and S/M: shield with logo on the side with 25 cm
      - Weight: S: 1kg  S/M 1,3kg  M: 2,5kg  L: 3,3kg  XL: 4,3kg
      - Load capacity: max. 75 kg